TERMS & CONDITIONS
DEFINITIONS
“The customer” or "you" means the person agreeing to this agreement. “The company”, "us" or "we" means Tekton Interiors.
"Goods" means the furniture items specified in the approved quotation; "Site" means the place where the goods are to be fitted;
“Installation” means the assembly and fitting of goods on site to the agreed specifications; "Fitter(s)" means the person(s) we instruct to fit the goods.
THE CONTRACT
These terms and conditions form the legally binding agreement between you (the customer) and Tekton Interiors whose registered address is Mon Abri, Burras Lane, Otley LS21 3EP. This agreement (and the agreed upon details of any surveys, plans, drawings and quotations) constitutes the entire agreement between our two parties. It is the customer’s responsibility to ensure all details are correct.
The company may change these terms upon giving reasonable notice of such changes, in writing to the customer.
QUOTATION/ORDER
Along with a written quotation, we will provide you with a clear outline, which may include sketched drawings, of the work to be carried out. You will not be charged for any initial design work if you decide not to go ahead.
You are under no obligation to commit to the work unless you accept our quotation and place an order. The contract will only start when you have agreed to proceed in writing, and a deposit of 10% is paid by you in accordance with the contract.
Any quotation we provide is valid for a period of 28 days from the date of the quotation, unless we provide written notice that the quotation is withdrawn. We reserve the right to increase the price if required after that period.
Quotations are based upon the costs of materials, labour, overheads, transport, and taxes at the date of the quotation. The final price may vary, from the initial quote as design modifications are often required and added to at the time of survey. You will be notified in writing of any such revisions.
Once we have received your 10% deposit and acceptance in writing, we will schedule your production slot date.
It is your responsibility to check that the specifications and dimensions given in the final design after the survey are suitable to your requirements.
All drawings, plans and paperwork are the property of the company and as such are subject to copyright.
PRICING AND PAYMENT
Payment terms are as follows:
-
An initial 10% of the total price is due upon accepting the quote and booking your
production slot. -
A further 50% of the total price is due when we are ordering materials (normally five weeks
prior to installation). This date will be confirmed to you by email. -
The remaining 40% of the total price is due upon completion of the installation.
Invoices will usually be sent by email unless otherwise agreed in writing. Payment should be made by bank transfer. Our bank details are:
Bank: TIDE
Account name: Tekton
Sort code: 04-06-05
Account number: 18628910
If you would prefer to pay by cheque, a surcharge of £5 per cheque payment will apply.
Our payment terms are seven days from receipt of invoice. If no payment has been received within seven days, we will call you for prompt payment.
If payment is not received within a further seven days (14 days in total from the date of invoice), we will charge 1% interest for each subsequent day the invoice remains unpaid.
Where a job is outside of a 25 mile radius from our workshop, we will charge 45p/mile, as well as a £50/hour surcharge for added time.
DATES AND TIMES
If you accept our quote, we will then book your production slot. Because the duration of other jobs cannot always be predicted, sometimes you will be given approximate dates, to be confirmed nearer the time. Installation dates will be confirmed and agreed with you not less than 48hrs in advance of the start of the installation.
Please be clear about other commitments including holidays etc. in the weeks either side of the provisional date and preferred working hours prior to committing to any installation date.
Our usual working hours for an installation day are from 08:00 to 18:00. Installations may be booked over several days if required, depending on the nature and size of the goods to be installed.
You should inform us in advance, with as much notice as possible, if you are no longer available on the agreed start date for the installation.
Occasionally, due to factors outside of our control, such as sickness, adverse weather or delayed delivery from a supplier, a confirmed date may have to change. We will always inform you in advance if this is the case, providing as much notice as possible.
ACCESS AND INSTALLATION
The installation process will take between 1-5 working days and we will complete the installation as soon as we reasonably can.
We will try to fulfil our obligations under this contract within a reasonable time. However, any installation or completion date we give is a guide only and is based upon information given by you and other information known to us at the time. We cannot be held liable for delay or failure to complete the works caused by events beyond our reasonable control, in those cases we will complete the work as soon as reasonably possible.
Whilst we pride ourselves on our clean and efficient working practices, we do need you to allow us sufficient access to the site and to prepare the workspace for the installation. Once you commit to an installation date you agree to:
• Ensure that the fitter has access to the site at reasonable times (between 08:00 and 18:00 on weekdays) or otherwise as agreed by you and us.
• Advise us on suitable parking and access for our van, with a clear route for transporting goods from our van to the site. If you have a driveway please have it ready for when we arrive on site. You must also ensure that all paths, driveways and passageways we will use on site are kept completely free from any and all obstructions.
• Inform your neighbours in advance if noise or restricted access related to the work is likely to be an issue.
• Wherever possible cutting will be done in the room (with dust sheets down and appropriate extraction connected to power tools, and a final hoover to leave the room at least as clean as we found it).
• Inform us of the location of any electrical cables and pipes before fitting. We will not be liable for any costs incurred for repairing electrical cables or damaged plumbing when drilling into walls, if we have not been informed of their location prior to the installation. Please note that cable detectors are not always reliable. We also need to know the location of the stopcock and fuse board.
• Ensure that the fitter can use the mains electricity supply from a standard 13A 240V socket free of charge, and that the supply is installed to the usual standards in force at the time.
• Let us know where suitable toilet facilities are, and where we can access a sink or tap during the installation.
• Provide reasonable access to the room where the goods are to be fitted (ladder access is not acceptable).
• Clear the room, and along our route into the room, where the installation is to take place of any breakable or valuable items that may be at risk of damage.
• Remove any frames, lampshades and soft furnishings that may get in the way of installation, in the room and along our route into the room where the installation is to take place.
• Dismantle or remove existing furniture or fittings in the room and, if necessary, along our route into the room where the installation is to take place.
• Clear the floor space required for the installation.
• Disconnect and remove TV, audio or media equipment.
If we are required to clear out a room or dismantle any pre-existing furniture in order to complete your installation, the added time it takes will be added onto your final bill at a rate of £50 per hour. We will protect your floors/carpets and property as necessary by using dust sheets, self adhesive removable carpet protectors, and by thoroughly cleaning up at the end of the installation. We will do our best to leave the site in the same condition we found it inside and out.
Please note that sometimes the installation of shelves may cause minor damage to existing paintwork, so you should be prepared for some touch up work after your installation. If redecorating, our advice is to paint the walls prior to our installation but to be prepared for additional touch-up painting afterwards.
Please note it will be your responsibility to reconnect any TV, audio or media cabling after we have finished and any paint has dried.
LIABILITY/RIGHTS
We are covered for public liability under NFU Mutual.
If you would prefer that we do not take photographs of the installation (both in progress and when completed) to use in our publicity materials, please let us know in advance. Otherwise, we will take the acceptance of these terms as authorisation to use them.
Any documents given to the customer by the company containing texts, designs, specifications or drawings are confidential and are the property of Tekton Interiors, and shall not be copied, reproduced or communicated to any third party without prior written agreement.
If you have any complaints or are unhappy with the quality of our work, please let us know as soon as possible and we will do what we can. Satisfied customers are important to us, and we aim to operate at all times with honesty and integrity. We are open to comment and criticism if something has not turned out the way you wanted. We will always do our best to put it right.
16 June 2025